Longkang Environmental Equipment Co., Ltd.
Commercial hot water, process cooling and sludge reduction equipment — engineered, built and supported by one manufacturer.
Longkang designs and builds three product lines under one roof: air-source heat pump water heaters for central hot water, water chillers for process and comfort cooling, and heat-pump sludge dryers for volume reduction. We work with design institutes, general contractors, water utilities and end owners — from a single rooftop unit to a multi-building central plant.
Three product lines
Air-source heat pump water heater
Heats domestic hot water by moving heat from ambient air instead of burning fuel or using resistive elements. Typical nominal heating COP is 3.0–4.5. Available as commercial circulating units, residential split/monobloc units, ultra-low-temperature units for cold climates, high-temperature units up to 60 °C and above, and pool heating units.
Typical use: hotel guest rooms, school dormitories, hospital wards, factory showers, swimming pools.
Water chiller
Provides chilled water at a standard 7 °C supply / 12 °C return. Air-cooled and water-cooled; screw, centrifugal and magnetic-bearing centrifugal compressors; low-temperature and explosion-proof variants for special processes.
Typical use: process cooling, workshops, commercial HVAC, data rooms, food and pharmaceutical production.
Heat-pump sludge dryer
Dries dewatered sludge at 40–80 °C using a closed-loop heat pump, so the unit runs at low temperature with heat recovery instead of high-temperature combustion. Delivered as a complete line: feeding, drying, discharge and odor control.
Typical use: municipal wastewater plants, printing and dyeing, chemicals, electroplating, food processing.
Why buyers work with us
| Point | What it means for your project |
|---|---|
| One manufacturer, three lines | Hot water, cooling and sludge drying specified by the same engineering team, so interfaces and controls match |
| Sizing based on real data | We ask for water demand profiles, ambient design temperatures, sludge moisture and operating hours before quoting a model |
| Turnkey supply | Equipment, storage tanks, pumps, piping interface, control cabinets, commissioning checklists |
| Documented delivery | Submittal drawings, parameter sheets, O&M manuals and spare-part lists issued in writing |
| Spare parts and service | Consumables and critical spares kept available; remote troubleshooting supported by phone and video |
Project footprint
More than 115 delivered projects across Hunan, Guangdong, Zhejiang, Fujian, Guangxi, Jiangxi, Guizhou, Yunnan and Shandong — hotels, schools, hospitals, factory dormitories, swimming pools, aquaculture farms and municipal sludge facilities. Project references can be provided on request, with location, scale, model and commissioning date.
How a project runs
- Requirement intake — demand profile, site conditions, utilities, drawings, schedule.
- Sizing and proposal — calculated capacity, buffer volume, equipment list, power and space requirements, written assumptions.
- Drawing coordination — CAD interface drawings, structural and acoustic notes, electrical load schedule.
- Manufacturing and inspection — production against the approved parameter sheet, factory test records.
- Delivery and installation guidance — packing list, lifting and positioning plan, piping and wiring supervision points.
- Commissioning — start-up checklist, measured performance, operator training.
- After-sales — scheduled maintenance, spare parts, fault diagnosis support.
Standards and compliance
Equipment is designed and tested against the applicable Chinese national standards, including GB 19577-2024 (minimum allowable values of energy efficiency and energy efficiency grades for heat pumps and chillers, effective 2025-02-01) and GB 29541-2013 (energy efficiency for heat pump water heaters). Refrigerant selection follows the national phase-out schedule for HCFCs and the shift toward low-GWP alternatives.
Where a project falls under local codes, export destination regulations or a specific utility incentive scheme, compliance is confirmed against the project documentation rather than assumed from the catalog.
Talk to an engineer
Send us the demand profile — daily hot water volume or cooling load, ambient design temperature, sludge moisture content, power supply and site constraints — and we will return a sizing sheet with the model, capacity and assumptions stated explicitly.
Phone: +86 400-878-0280 | +86 130-0200-1280 Email: admin@longk.com
Explore
- Air-source heat pump water heater
- Water chiller
- Sludge dryer
- Solutions by industry
- Project references
- Contact and enquiries
Longkang Environmental Equipment Co., Ltd. — air-source heat pump water heaters, water chillers and sludge dryers, supplied with sizing, drawings, commissioning support and spare parts.