Heat pumps · Chillers · Sludge drying systems
Knowledge

Heat-Pump Drying of Livestock Manure: Volume Reduction and Fertiliser Recovery

What the manure contains

Source Dry solids Moisture Nitrogen (dry basis) Notes
Pig manure, belt-separated 20%–30% 70%–80% 2%–4% Fibrous, high ammonia
Pig manure, slurry 3%–8% 92%–97% 3%–6% Needs dewatering first
Poultry litter 60%–75% 25%–40% 3%–6% Already fairly dry
Poultry manure, wet 20%–35% 65%–80% 4%–7% High ammonia, corrosive
Cattle manure, separated 15%–25% 75%–85% 1.5%–3% Bulky, high fiber
Duck manure 20%–30% 70%–80% 3%–5% Wet, odorous

Slurry at 5% dry solids cannot be dried economically: the water load is enormous. Dewater first with a screw press or a belt press to 20%–30% dry solids, then dry.

Why dry it at all

Reason Effect
Volume reduction 100 t at 80% moisture becomes about 29 t at 30%
Transport cost Two-thirds fewer truck movements
Storage Stable, stackable, less leachate
Fertiliser value Concentrated nutrients per tonne
Odor Reduced after drying and composting
Regulation Easier to meet storage and land-spreading rules

The volume arithmetic is the same as for sludge: mass falls in proportion to the water removed, and the dry solids stay the same.

Dried mass = wet mass × (100 − initial moisture) ÷ (100 − final moisture)

For 100 t at 80% to 30%: 100 × 20 ÷ 70 = 28.6 t.

Process temperatures and nutrient retention

Temperature Drying rate Nitrogen loss Pathogen reduction Comment
45–55 °C Slow Low Partial Highest nutrient retention
55–65 °C Moderate Moderate Good Normal operating range
65–75 °C Fast Higher Strong Upper limit for heat pump
Above 80 °C Very fast High Strong Thermal drying, not heat pump

Ammonia starts to volatilise significantly above about 60 °C, and every kilogram of ammonia lost is nitrogen the farmer paid for. Heat pump drying at 55–65 °C keeps more nitrogen than a rotary dryer at 120 °C, which is one of its main advantages in fertiliser applications.

Corrosion and materials

Component Risk Material
Chamber Ammonia and moisture 304 or 316L stainless
Coil Ammonia, dust, moisture Coated aluminum, epoxy or phenolic
Frame Condensation Galvanised plus coating
Fasteners Galvanic corrosion Stainless
Condensate tray Acidic condensate PP or stainless
Sensors Ammonia attack Protected enclosure

Poultry manure is the most aggressive: high ammonia, high moisture, fine dust. A standard dryer will corrode within two years. Specify the materials for the application, not for sludge.

Odor and ammonia control

Measure Purpose
Enclosed chamber, negative pressure Prevents fugitive release
Acid scrubber or biofilter Removes ammonia and odor
Condensate collection and treatment High ammonia load
Air recirculation with a bleed Reduces exhaust volume
Covered storage of raw manure Reduces the source

Ammonia scrubbers using dilute acid recover ammonium sulfate, which is itself a fertiliser. On a large farm that can offset part of the operating cost.

Economics: a worked example

A pig farm producing 20 t per day of separated manure at 78% moisture, dried to 30%:

Item Calculation Result
Dry solids 20 × 22% 4.4 t/d
Dried product 4.4 ÷ 70% 6.3 t/d
Water evaporated 20 − 6.3 13.7 t/d
Energy at 350 kWh/t 13.7 × 350 4,795 kWh/d
Cost at USD 0.10/kWh 4,795 × 0.10 USD 480/d
Transport saved 13.7 t/d × USD 8/t USD 110/d
Fertiliser value 6.3 t × USD 60/t USD 378/d
Net 378 + 110 − 480 USD 8/d

At these prices the project breaks even on energy alone and earns its return from avoiding disposal cost, which is the larger item in most jurisdictions. Where the disposal cost is USD 20–40 per tonne, the case improves sharply.

Disposal route Cost per tonne Comment
Land application, own land Low Limited by nutrient balance
Land application, contracted USD 10–20 Transport dominates
Composting USD 15–30 Needs a market for compost
Incineration USD 40–80 High water content penalises
Landfill USD 30–60 Restricted in many regions

Matching the dryer to the farm

Farm size Manure per day Dryer size Comment
500 sows 5–8 t 1 unit, 5 t/d Batch operation
2,000 sows 20–30 t 2 units Continuous
50,000 layers 8–12 t 1–2 units Poultry litter, drier feed
200 dairy cows 10–15 t 1 unit High fiber, slower drying
Centralised plant 100 t+ Multiple lines Collects from several farms

A centralised plant collecting from several farms is usually more economic than a dryer on every farm, because the equipment is used continuously and the product can be blended and sold in bulk.

Longkang Environmental Equipment Co., Ltd. supplies manure dryers with stainless chambers, coated coils and an ammonia scrubber option, and sizes the plant on the dewatered manure rather than on the raw slurry. Phone: +86 400-878-0280 | +86 130-0200-1280

Questions from farm projects

Can fresh slurry be dried directly?

No, not economically. At 5% dry solids the water load is twenty times the solids. Dewater to 20%–30% first.

Is the dried manure safe to use as fertiliser?

It needs to be hygienised, usually by composting after drying or by holding at temperature for a defined period. Check the local rules for pathogen and heavy-metal limits, especially for poultry litter.

Does drying lose nitrogen?

Some, especially above 60 °C. Operating at 55–60 °C and scrubbing the exhaust recovers part of it. The loss is far lower than in a high-temperature rotary dryer.

How do I handle the ammonia in the exhaust?

An acid scrubber is the standard solution; it produces ammonium sulfate. A biofilter works but needs a large footprint and consistent moisture.

What is the product worth?

Dried manure is typically sold as an organic fertiliser at USD 40–100 per tonne, depending on nutrient content, packaging and local demand. Blending with other materials can raise the value.

Can the dryer run on the farm’s own biogas or solar power?

Yes. Many farms have biogas from the digester, and a biogas engine plus a heat pump is a strong combination. Solar PV can cover part of the daytime load.

Related reading

Frequently asked questions