Indicative equipment prices
Ex-works, sludge at 80% moisture dried to 30%, standard carbon steel frame with stainless contact parts, ambient 20 °C.
| Capacity (wet feed) | Water evaporated | Typical application | Equipment price (USD) |
|---|---|---|---|
| 1–3 t/day | 0.07–0.21 t/h | Printing, plating, small WWTP | 30,000–60,000 |
| 5 t/day | 0.36 t/h | Industrial park WWTP | 70,000–110,000 |
| 10 t/day | 0.71 t/h | Municipal WWTP, chemical plant | 110,000–180,000 |
| 20 t/day | 1.43 t/h | Municipal WWTP | 180,000–280,000 |
| 30 t/day | 2.14 t/h | Regional sludge center | 260,000–380,000 |
| 50 t/day | 3.57 t/h | Centralised treatment | 400,000–600,000 |
All stainless steel construction, high-temperature variants, or units with explosion protection sit at the top of each range or above it.
What is inside a dryer quotation
| Line item | Share of installed cost | What to check |
|---|---|---|
| Heat pump and refrigeration circuit | 30%–40% | Compressor brand, refrigerant, COP at design conditions |
| Drying chamber and conveyor | 15%–20% | Belt or paddle, material, residence time |
| Heat exchangers (evaporator and condenser) | 10%–15% | Material, surface area, cleanability |
| Fans and air handling | 5%–8% | Airflow, static pressure, VFD |
| Controls and instrumentation | 5%–8% | PLC brand, moisture measurement, remote access |
| Odor control | 5%–12% | Biofilter, chemical scrubber or activated carbon |
| Condensate treatment | 3%–6% | Discharge to sewer or reuse |
| Feed and discharge equipment | 5%–10% | Pump, screw conveyor, silo |
| Installation and commissioning | 10%–15% | Rigging, piping, electrical, training |
| Freight and duty | 3%–8% | Incoterm and unloading |
A quotation for “sludge dryer, 10 t/day” that does not list these separately cannot be compared with one that does.
The capacity unit trap
Dryers are sold by wet feed capacity, by water evaporation rate, or by dried product output. For 10 t/day at 80% to 30%:
- Wet feed: 10 t/day, or 0.42 t/h over 24 hours.
- Water evaporated: 7.14 t/day, or 0.30 t/h.
- Dried product: 2.86 t/day.
A supplier quoting “10 t/day” of evaporation is offering a machine more than three times the size of one quoting 10 t/day of wet feed. Always convert to kg of water per hour and compare that number.
What moves the price most
| Choice | Price effect | When it is justified |
|---|---|---|
| 316L instead of 304 stainless | +15%–30% | Chloride-rich sludge, chemical and plating waste |
| Belt dryer instead of paddle | +10%–20% | Mixed or fibrous sludge, higher capacity |
| Full automation with moisture feedback | +8%–15% | Unmanned shifts, variable feed |
| Odor control to a strict limit | +10%–25% | Urban sites, residential neighbors |
| Explosion protection (ATEX or equivalent) | +25%–45% | Solvent-bearing or oily sludge |
| Duplicated fans or compressor | +15%–25% | 24/7 operation with no shutdown window |
| Containerised or skid-mounted | +10%–18% | Fast installation, remote sites |
How to compare quotes
- Fix the basis: feed moisture, target moisture, tonnes per day, operating hours, sludge type, ambient design temperature.
- Require capacity in kg water/h at those conditions.
- Require the specific energy in kWh per tonne of water, with the calculation basis.
- Require a line-by-line bill of quantities including odor control and condensate.
- Require the guarantee terms: final moisture, capacity, specific energy, and what happens if they are missed.
- Normalise freight, installation and commissioning.
The costs outside the dryer
A sludge drying project usually carries costs that the dryer quotation does not:
| Item | Typical cost | Note |
|---|---|---|
| Civil works and foundations | 5%–12% of equipment | Load and drainage matter |
| Electrical supply upgrade | 3%–10% | The dryer is a large electrical load |
| Sludge storage silo | 4%–8% | Decouples dewatering from drying |
| Building or shelter | 5%–15% | Weather protection, odor containment |
| Permitting and environmental assessment | Project-specific | Often the longest lead item |
| Operator training and spares | 2%–4% | Budget a first-year spares kit |
Frequently asked questions
Why do two sludge dryer quotes differ so much?
Almost always one of three things: a smaller machine, a scope without odor control or installation, or thinner materials (carbon steel chamber instead of stainless). Convert both to kg water/h and to the same scope before comparing.
What is the price per tonne of daily capacity?
Roughly USD 11,000–18,000 per tonne per day of wet feed capacity for standard machines, falling to USD 8,000–12,000 at 50 t/day. The economy of scale is real but flattens above 30 t/day.
Does drying to 20% instead of 30% cost much more?
The equipment is 8%–15% larger and the specific energy rises 5%–15%. Whether that is worth it depends entirely on what the receiving facility pays for water.
What are typical delivery terms?
30% deposit, 60% before shipment, 10% after commissioning, with 45–75 days production for standard sizes and longer for large or custom units. Skid-mounted units ship faster but cost more.
How much should I budget for maintenance?
2%–3% of equipment cost per year, covering filters, belts, bearings, heat exchanger cleaning and refrigerant checks. Heat exchanger cleaning is the item most often underestimated.
Is a used dryer worth buying?
Rarely. The heat exchanger condition is unknown, the refrigerant may be obsolete, and the capacity guarantee is gone. If the price is below 40% of new and the machine can be inspected under power, it can be considered.
Longkang Environmental Equipment Co., Ltd. quotes with the capacity stated in kg of water per hour, the specific energy and a full bill of quantities, so offers from different suppliers can be compared on the same basis. Phone: +86 400-878-0280 | +86 130-0200-1280
Related reading