Part 1 — Volume reduction
Product mass = wet mass × (1 − M₁) ÷ (1 − M₂) Volume reduction = 1 − product mass ÷ wet mass
Where M₁ is inlet moisture and M₂ outlet moisture, both on a wet basis.
| Inlet → outlet | Mass remaining | Reduction |
|---|---|---|
| 80% → 60% | 50% | 50% |
| 80% → 40% | 33% | 67% |
| 80% → 30% | 29% | 71% |
| 80% → 20% | 25% | 75% |
| 80% → 10% | 22% | 78% |
| 70% → 40% | 50% | 50% |
| 60% → 30% | 57% | 43% |
The pattern is worth internalising: starting from wetter cake, the same outlet moisture produces a larger reduction, because there was more water to remove in the first place. A plant that improves its dewatering from 82% to 78% moisture reduces the dryer’s workload by about 20% — often cheaper than buying a bigger dryer.
Part 2 — Drying cost
Electricity dominates the operating cost of a heat-pump dryer:
Daily electricity cost = water evaporated (kg/d) ÷ specific consumption (kg/kWh) × tariff
At 3 kg/kWh — a realistic mid-range figure — every tonne of water removed needs about 333 kWh. Multiply by your industrial tariff, and add the secondary costs.
| Cost item | Basis | Typical share |
|---|---|---|
| Electricity | kWh × tariff | 60%–75% |
| Maintenance and spares | 3%–5% of equipment cost per year | 8%–15% |
| Labor | Operator time, if not automated | 5%–15% |
| Odor control media and power | Carbon or scrubber consumables | 5%–10% |
| Water and condensate handling | Return to treatment | Small |
Worked example: 10 t/d plant
Assumptions — and they are assumptions, to be replaced with local figures:
| Item | Value |
|---|---|
| Wet sludge | 10 t/d at 80% moisture |
| Product | 2.86 t/d at 30% moisture |
| Water evaporated | 7.14 t/d |
| Specific consumption | 3 kg water per kWh |
| Electricity | 2,380 kWh/d |
| Tariff | RMB 0.80 per kWh |
| Cost / saving | Calculation | Per day |
|---|---|---|
| Electricity | 2,380 × 0.80 | RMB 1,904 |
| Maintenance and spares | 15% of electricity | RMB 286 |
| Total drying cost | — | RMB 2,190 |
| Transport avoided | 7.14 t × RMB 80/t | RMB 571 |
| Disposal fee avoided | 7.14 t × RMB 350/t | RMB 2,499 |
| Total avoided cost | — | RMB 3,070 |
| Net benefit | 3,070 − 2,190 | RMB 880/d |
At 330 operating days a year, the net benefit is roughly RMB 290,000 — which sets the payback period against the capital cost of the line. Change the disposal fee to RMB 150/t and the calculation turns negative; change the tariff to RMB 0.55/kWh and it improves sharply. The conclusion is entirely local, which is why a supplier’s generic payback claim should never be accepted without substitution of local figures.
Sensitivity: what actually moves the answer
| Variable | Change | Effect on net benefit |
|---|---|---|
| Disposal fee | RMB 350 → 150/t | Falls sharply, may go negative |
| Electricity tariff | 0.80 → 0.55/kWh | Improves by about 30% |
| Outlet moisture | 30% → 40% | Less evaporation, lower cost, higher disposal tonnage |
| Specific consumption | 3 → 2.5 kg/kWh | Electricity cost rises 20% |
| Transport distance | 30 → 80 km | Saving grows proportionally |
Two findings recur in real projects. First, the disposal fee dominates: drying is economically attractive where landfill or incineration is expensive and unattractive where it is cheap. Second, the outlet moisture target is an economic optimum, not the driest achievable value — pushing from 30% to 20% adds evaporation but may not reduce the disposal charge if the receiving facility prices per tonne regardless.
The non-financial benefits
Three arguments often matter more than the payback:
- Logistics. Halving the tonnage halves the truck movements, which matters for plants with restricted access or strict traffic windows.
- Compliance headroom. Some regions restrict the moisture content accepted at landfill; drying keeps the plant inside the limit even when dewatering performance slips.
- Downstream stability. Consistent, lower-moisture feed improves the performance of a co-incinerator or cement kiln, reducing rejections.
Frequently asked questions
Does drying reduce the hazardous waste classification?
No. Drying removes water, not hazard. Sludge classified as hazardous remains hazardous waste after drying and must be handled as such.
Is the 60% figure a legal requirement?
Around 60% moisture is a widely applied threshold for landfill acceptance of municipal sludge in China, but it is an acceptance criterion rather than a universal legal limit for every route. Confirm with the receiving facility and the applicable local standard.
Can solar drying be cheaper?
Solar drying has very low running cost but needs large areas, is weather-dependent and is slow. It suits warm, dry climates with land available; it is impractical in humid regions or space-constrained plants.
What if electricity is generated on site?
Then the calculation changes completely: use the marginal cost of self-generated power, not the grid tariff. Some plants with biogas generation find drying effectively free at the margin.
How accurate is the 3 kg/kWh figure?
It is a planning figure. New, well-insulated lines on favorable sludge reach 3.5–4; older lines with fouled coils fall to 2–2.5. Ask for a contracted specific consumption figure, verified by measurement at commissioning.
Should I include the cost of the dried product’s disposal?
Yes — the product still has to go somewhere. The saving is on the reduced tonnage and, in some cases, on a lower treatment charge for drier material.
Longkang Environmental Equipment Co., Ltd. provides mass balances and energy estimates with the assumptions listed separately, so the payback can be recalculated with local tariffs and fees. Phone: +86 400-878-0280 | +86 130-0200-1280
Related reading