Heat pumps · Chillers · Sludge drying systems
Knowledge

Technical articles

Technical articles, sizing methods and O&M notes by product line.

Water Chiller Installation: Plant Room Layout and Services

Plant room layout for water chillers: rigging routes, tube pull space, clearances, ventilation, drainage, vibration isolation and electrical supply.

Chilled Water Piping and Insulation: Sizing, Layout and Testing

Chilled water pipe sizing by flow and pressure drop, layout rules, air venting, insulation thickness, vapor barrier detailing and pressure testing.

Cooling Tower Installation and Piping: Siting, Water Balance and Freeze Protection

Siting and piping a cooling tower for water-cooled chillers: clearances, approach temperature, make-up and blowdown, equalising lines and freeze protection.

Water Chiller Commissioning: Sequence, Measurements and Acceptance

Commissioning a water chiller step by step: pre-start checks, oil heater, water flow, approach temperatures, capacity verification and interlocks.

Water Chiller Maintenance Schedule and Service Plan

Preventive maintenance for water chillers: tube cleaning, water treatment, oil analysis, leak checks and the intervals that protect efficiency.

Water Chiller Fault Codes and Troubleshooting

Chiller alarms explained: high and low pressure, low evaporator temperature, flow failure, oil pressure and motor overload, with the checks that find the cause.

Descaling a Chiller Condenser: Diagnosis, Method and Frequency

How to detect condenser fouling from approach temperature, clean tubes by brushing or chemical descaling, and set a frequency based on water quality.

How to Calculate Chiller Cooling Load: Formulas and Worked Examples

Calculate chiller cooling load with the Q = m × c × ΔT method for process cooling, plus building loads, worked examples and the margin rules that avoid…

Cooling a Chemical Reactor: Chiller Selection Points That Decide the Batch

Selecting a chiller for reactor jacket cooling: peak heat release, glycol temperature, buffer tank sizing, wetted materials and hazardous-area classification.

COP vs IPLV: What the Two Efficiency Figures Actually Measure

COP measures full-load efficiency, IPLV weights part-load performance. How each is calculated, which to specify, and why a better COP can mean higher annual energy use.