Heat pumps · Chillers · Sludge drying systems
Knowledge

Technical articles

Technical articles, sizing methods and O&M notes by product line.

Case Study: Drying Hazardous Chemical Sludge at 20 Tonnes a Day

Drying 20 t/day of hazardous chemical sludge from 82% to 35% moisture: equipment selection, corrosion measures, commissioning data and disposal savings.

Heat-Pump Drying versus Conventional Thermal Drying: Which Fits Sludge

Comparing heat-pump low-temperature drying with thermal drying for sludge: energy per tonne of water, emissions, product quality, footprint and cost.

Sludge Drying versus Direct Incineration: Comparing the Real Cost

Comparing sludge drying and direct incineration: mass and energy balance, transport, gate fees, auxiliary fuel and the routes that suit each plant.

Combining Filter Press Dewatering with Low-Temperature Drying

Combining filter press dewatering with heat-pump drying: cake solids, chemical conditioning, mass balance, buffer storage and the interface between stages.

Belt versus Paddle Sludge Dryers: Selection for Different Sludge Types

Comparing belt and paddle sludge dryers: sludge consistency, residence time, capacity, product form, maintenance and suitability by sludge type.

Sludge Drying and the Low-Carbon Factory: Where the Emissions Actually Fall

Carbon accounting for sludge drying: energy per tonne of water, grid factors, avoided transport and landfill methane, and what a defensible claim looks like.

Sludge Dryer Spare Parts: What Wears Out and What to Keep on Site

Sludge dryer wear items with replacement intervals, recommended on-site spares for municipal and industrial duty, and lead times for critical parts.

Heat-Pump Drying of Livestock Manure: Volume Reduction and Fertiliser Recovery

Drying pig and poultry manure with heat pumps: moisture reduction, nutrient retention, odor and corrosion control, and the economics of fertiliser recovery.

Heat-Pump Sludge Dryer Installation: Site, Foundations and Interfaces

Site requirements for heat-pump sludge dryers: footprint, floor loading, drainage, condensate and odor control, ambient conditions and access for haulage.

Sludge Dryer Feed and Discharge Systems: Installation and Commissioning

Installing and commissioning sludge dryer feed and discharge: cake consistency, conveyor layout, blockage prevention, dust control and dry product handling.