Heat pumps · Chillers · Sludge drying systems
Knowledge

Technical articles

Technical articles, sizing methods and O&M notes by product line.

Heat Pump Selection Mistakes That Cost Money After Handover

The selection errors that cause short capacity, cold water and high bills: derating, peak hour, tank volume, COP conditions, standby and electrical supply.

How to Read a Heat Pump COP (and Check the Number Yourself)

What heat pump COP measures, the rating conditions behind a datasheet figure, how to correct COP for real water and ambient temperatures, and how to verify it on…

What Is an Air-Source Heat Pump Water Heater? Working Principle, Structure and Applications

How an air-source heat pump water heater works, its four core components, typical COP, product types, sizing method and installation requirements — explained with tables.

Commercial vs Residential Heat Pump Water Heaters: What Actually Differs

How commercial heat pump water heaters differ from residential units: compressor type, tank design, phase, redundancy, service life and when the step up pays back.

Why Air-Source Heat Pumps Defrost, and How the Defrost Logic Works

How air-source heat pump defrost works: frost conditions, time-temperature versus demand defrost, termination settings, meltwater drainage and the real COP penalty.

How to Size an Air-Source Heat Pump Water Heater: A Six-Step Method

A six-step sizing method for air-source heat pump water heaters — daily demand, peak-hour factor, ambient correction and tank volume, with a worked example.