Heat pumps · Chillers · Sludge drying systems
Knowledge

Technical articles

Technical articles, sizing methods and O&M notes by product line.

Reference Projects: 30 Heat Pump Installations Across Six Sectors

Thirty reference installations of air-source heat pump water heaters and chillers in hotels, schools, dormitories, hospitals and spas across nine provinces.

Frost Build-Up and Filter Blockage on a Heat-Pump Sludge Dryer

Why frost forms on a heat-pump sludge dryer evaporator, how each defrost method works, and the filter and coil cleaning schedule that keeps capacity at design.

Odor and Condensate from Sludge Drying: What to Do With Both

Where odor and condensate come from in a heat-pump sludge dryer, how to size a biofilter or scrubber, and how to characterize and discharge the condensate.

Which Sludges Can a Heat-Pump Dryer Handle?

Sludge types that dry well at 40–80 °C, the ones that do not, and the seven laboratory tests that decide suitability before a dryer is specified.

Sludge Drying Investment Payback: How to Build the Case

A worked payback calculation for a 10 t/day sludge dryer, the sensitivities that decide the outcome, and the costs that are usually left out of the case.

How Does a Sludge Dryer Work? Low-Temperature Drying and Dehumidification

How heat-pump sludge dryers remove water at 40–80 °C: the closed-loop dehumidification cycle, why low temperature matters, and what the process does and does not achieve.

How Low Can a Sludge Dryer Take the Moisture Content?

Final moisture targets by disposal route, why 10% is not always better than 30%, the stickiness zone that limits drying, and the mass balance for each target.

Sludge Dryer Energy Consumption and Operating Cost

Specific energy per tonne of water evaporated, a full cost calculation for a 10 t/day plant, why the figure varies, and how to reduce it.

How Much Does a Sludge Dryer Cost?

Indicative prices from 1 to 50 t/day, the seven cost lines in a dryer quotation, and how to compare offers that use different capacity units.

Sludge Dryer Throughput Below Design: How to Find the Cause

Why a heat-pump sludge dryer falls short of rated throughput, the mass balance that identifies the cause, and the six checks in the order that finds it fastest.