Heat pumps · Chillers · Sludge drying systems
Knowledge

Technical articles

Technical articles, sizing methods and O&M notes by product line.

Uneven Drying and Wet Patches: Why They Happen and How to Fix Them

Why a sludge dryer produces wet patches, the loading, airflow and stickiness causes, and the mechanical and operational fixes that bring moisture variation within ±3 points.

Chiller Low-Pressure Alarm: What Low Suction Pressure Means

What low suction pressure means on a water chiller, how to tell a refrigerant leak from a flow or expansion valve problem, and how to avoid freezing the…

Chiller Compressor Noise and Overload Trips: What to Check

How to read compressor noise on a water chiller, the six causes of overload trips, and the electrical and refrigerant checks that separate them.

Chiller Refrigerant Leak: Symptoms, Detection and Repair

How to recognize a refrigerant leak on a water chiller, the six detection methods, the correct repair and evacuation procedure, and the compliance rules.

Why Chillers Are More Efficient at Part Load, and How to Stage Multiple Machines

Why chillers run most efficiently at 50%–75% load, how IPLV is weighted, and how to choose the number and size of machines for staging.

Choosing a Chiller for a Data Center

What makes a data center chiller different: load profile, redundancy, water temperatures, free cooling, restart requirements and live maintenance access.

Inverter versus Fixed-Speed Chillers: What the Saving Actually Is

Where the 15%–30% saving on a variable-speed chiller comes from, how to estimate payback from the load profile, and the electrical and maintenance differences.

How Long Does a Water Chiller Last, and When Should It Be Overhauled?

Expected service life by chiller type, the running-hour intervals for compressor overhaul, and a repair-or-replace decision table for machines over ten years.

Why a Heat Pump Water Heater Cycles On and Off Constantly

Why an air-source heat pump starts and stops every few minutes, how many starts per hour is normal, and the six fixes — from tank volume to sensor…

Heat Pump High-Pressure Alarm: Causes and a Five-Step Check

What a high-pressure trip means on an air-source heat pump, the five causes ranked by frequency, the measurements that separate them, and how to reset safely.