Heat pumps · Chillers · Sludge drying systems
Knowledge

Technical articles

Technical articles, sizing methods and O&M notes by product line.

Cleaning the Coils of a Sludge Heat Pump Dryer

How to detect and clean the evaporator and condenser coils of a sludge heat pump dryer, with a maintenance schedule and the mistakes that damage fins.

Heat-Pump Sludge Dryer Installation: Site, Foundations and Interfaces

Site requirements for heat-pump sludge dryers: footprint, floor loading, drainage, condensate and odor control, ambient conditions and access for haulage.

Sludge Dryer Feed and Discharge Systems: Installation and Commissioning

Installing and commissioning sludge dryer feed and discharge: cake consistency, conveyor layout, blockage prevention, dust control and dry product handling.

Sludge Dryer Electrical and Control Systems: Installation Guide

Electrical installation and control philosophy for heat-pump sludge dryers: power sizing, sensors, PLC logic, VFDs, interlocks and panel protection.

Sludge Dryer Commissioning: Test Sequence and Acceptance Criteria

Commissioning a heat-pump sludge dryer: empty run, heat-up, load ramp, moisture and throughput tests, energy per tonne and acceptance criteria.

What Is a Sludge Dryer? Heat-Pump Drying, Moisture Content and Volume Reduction

How heat-pump sludge dryers work at 40–80 °C, typical inlet and outlet moisture content, volume reduction calculation, disposal routes and selection criteria.

Sludge Dryer Product Series: Types, Capacities and How to Choose

Sludge dryer types compared by evaporation rate, temperature and footprint, with a selection matrix by sludge source and the calculations that size a unit.

How to Size a Sludge Dryer: A Complete Calculation Guide

Size a heat-pump sludge dryer from wet tonnage, inlet and outlet moisture, evaporation rate and energy demand — with a worked example and the errors that cause shortfalls.

How to Calculate Sludge Throughput: Wet Tonnage, Dry Solids and Evaporation

Convert between wet sludge tonnage, dry solids and evaporation rate, check a supplier's claimed capacity, and avoid the specification errors that cause shortfalls.

Sludge Volume Reduction and Drying Cost: How to Calculate Both

Calculate sludge volume reduction from moisture content, then build a drying cost model covering electricity, transport and disposal — with a worked example and payback check.