Knowledge base
Technical content by product line
Working principles, sizing, installation, commissioning, O&M and troubleshooting, organised by product line.
Heating · Hot water
Air-source heat pump water heaters
Air-source heat pump water heaters producing 55–60°C domestic and process hot water for hotels, schools, hospitals, factories and pools.
- Hotel Hot Water by Air-Source Heat Pump: System Design and Equipment Selection→
- School Dormitory Hot Water: Air-Source Heat Pump System Design→
- Hospital Hot Water Systems: Design Requirements for Air-Source Heat Pumps→
- Factory Dormitory Hot Water: Air-Source Heat Pump Design for Shift Patterns→
- Heat Pump versus Electric Water Heater: Energy and Cost Comparison→
Cooling · Process
Water chillers
Air-cooled, water-cooled, screw, centrifugal and low-temperature chillers for process cooling and central air conditioning.
- Screw versus Centrifugal Chillers: Selection by Capacity and Load Profile→
- Explosion-Proof Chillers for Chemical and Hazardous Areas→
- Hotel Central Air-Conditioning: Chiller Configuration and Plant Design→
- Hospital Chiller Systems: Redundancy, Isolation and Indoor Air Quality→
- Case Study: Explosion-Proof Chillers for a Fine Chemical Plant→
Drying · Reduction
Sludge dryers
Low-temperature heat pump drying and dehumidification, reducing sludge from about 80% to 10–40% moisture for municipal and industrial sludge.
- Heat-Pump Drying versus Conventional Thermal Drying: Which Fits Sludge→
- Sludge Drying versus Direct Incineration: Comparing the Real Cost→
- Combining Filter Press Dewatering with Low-Temperature Drying→
- Belt versus Paddle Sludge Dryers: Selection for Different Sludge Types→
- Sludge Drying and the Low-Carbon Factory: Where the Emissions Actually Fall→