Heat pumps · Chillers · Sludge drying systems
Knowledge

Technical articles

Technical articles, sizing methods and O&M notes by product line.

Water Chiller Installation: Plant Room Layout and Services

Plant room layout for water chillers: rigging routes, tube pull space, clearances, ventilation, drainage, vibration isolation and electrical supply.

Chilled Water Piping and Insulation: Sizing, Layout and Testing

Chilled water pipe sizing by flow and pressure drop, layout rules, air venting, insulation thickness, vapor barrier detailing and pressure testing.

Cooling Tower Installation and Piping: Siting, Water Balance and Freeze Protection

Siting and piping a cooling tower for water-cooled chillers: clearances, approach temperature, make-up and blowdown, equalising lines and freeze protection.

Water Chiller Commissioning: Sequence, Measurements and Acceptance

Commissioning a water chiller step by step: pre-start checks, oil heater, water flow, approach temperatures, capacity verification and interlocks.

Water Chiller Maintenance Schedule and Service Plan

Preventive maintenance for water chillers: tube cleaning, water treatment, oil analysis, leak checks and the intervals that protect efficiency.

Water Chiller Fault Codes and Troubleshooting

Chiller alarms explained: high and low pressure, low evaporator temperature, flow failure, oil pressure and motor overload, with the checks that find the cause.

Descaling a Chiller Condenser: Diagnosis, Method and Frequency

How to detect condenser fouling from approach temperature, clean tubes by brushing or chemical descaling, and set a frequency based on water quality.

Cooling a Chemical Reactor: Chiller Selection Points That Decide the Batch

Selecting a chiller for reactor jacket cooling: peak heat release, glycol temperature, buffer tank sizing, wetted materials and hazardous-area classification.

COP vs IPLV: What the Two Efficiency Figures Actually Measure

COP measures full-load efficiency, IPLV weights part-load performance. How each is calculated, which to specify, and why a better COP can mean higher annual energy use.

Chiller Selection Margins: How Much Spare Capacity Is Too Much

Where to apply safety margin in chiller selection, how allowances compound, what oversizing costs at part load, and how to write the margin into a specification.