Heat pumps · Chillers · Sludge drying systems
Knowledge

Technical articles

Technical articles, sizing methods and O&M notes by product line.

How to Calculate Chiller Cooling Load: Formulas and Worked Examples

Calculate chiller cooling load with the Q = m × c × ΔT method for process cooling, plus building loads, worked examples and the margin rules that avoid…

Cooling a Chemical Reactor: Chiller Selection Points That Decide the Batch

Selecting a chiller for reactor jacket cooling: peak heat release, glycol temperature, buffer tank sizing, wetted materials and hazardous-area classification.

COP vs IPLV: What the Two Efficiency Figures Actually Measure

COP measures full-load efficiency, IPLV weights part-load performance. How each is calculated, which to specify, and why a better COP can mean higher annual energy use.

Chiller Selection Margins: How Much Spare Capacity Is Too Much

Where to apply safety margin in chiller selection, how allowances compound, what oversizing costs at part load, and how to write the margin into a specification.

Heat Pump versus Electric Water Heater: Energy and Cost Comparison

Comparing air-source heat pumps with electric resistance water heaters: energy per cubic meter, running cost, capital cost and payback, with worked numbers.

Heat Pump versus Gas Boiler for Hot Water: Running Cost and Carbon

Comparing air-source heat pumps with gas boilers for hot water: energy per cubic meter, running cost at different tariffs, carbon and hybrid options.

Air-Source Heat Pump Fault Codes and Troubleshooting

Common air-source heat pump fault codes explained with causes and checks, from high pressure and low pressure to flow, defrost and communication alarms.

Hotel Hot Water by Air-Source Heat Pump: System Design and Equipment Selection

Designing hotel hot water with air-source heat pumps: demand per room, peak-hour factor, unit and tank sizing, return loops and legionella control.

School Dormitory Hot Water: Air-Source Heat Pump System Design

Designing hot water for school dormitories with air-source heat pumps: per-student demand, concentrated peak, storage sizing, holiday mode and anti-tamper.

Hospital Hot Water Systems: Design Requirements for Air-Source Heat Pumps

Design requirements for hospital hot water: separate circuits, 60 °C storage and thermal disinfection, redundancy, water quality and infection control.