Heat pumps · Chillers · Sludge drying systems
Knowledge

Technical articles

Technical articles, sizing methods and O&M notes by product line.

Sludge Volume Reduction and Drying Cost: How to Calculate Both

Calculate sludge volume reduction from moisture content, then build a drying cost model covering electricity, transport and disposal — with a worked example and payback check.

Sludge Dryer Selection Mistakes That Show Up in the First Winter

Why sludge dryers fall short: wet tonnage versus evaporation, moisture sampling, winter derate, sticky sludge, condensate and corrosion — with the checks that catch each.

Chiller Spare Parts: What to Stock, and When to Replace It

Chiller wear items, replacement intervals, recommended on-site stock by machine count, typical lead times and how much to budget for spares.

Food Processing Chiller Systems: Hygiene, Load Profile and Heat Recovery

Chiller design for food plants: process loads, glycol circuits, hygiene and washdown, redundancy, heat recovery and food-safety documentation.

Explosion-Proof Chillers for Chemical and Hazardous Areas

Selecting explosion-proof chillers: hazardous zone classification, Ex protection concepts, temperature classes, remote condensers and installation requirements.

Hotel Central Air-Conditioning: Chiller Configuration and Plant Design

Chiller plant design for hotels: load profile, chiller staging, part-load efficiency, noise, redundancy and integration with domestic hot water.

Hospital Chiller Systems: Redundancy, Isolation and Indoor Air Quality

Designing hospital chiller plants: separate comfort and critical circuits, N+1 redundancy, humidity control, emergency power and isolation for maintenance.

Case Study: Explosion-Proof Chillers for a Fine Chemical Plant

How a fine chemical plant replaced an in-zone chiller with two Ex-rated low-temperature units outside the classified area, including commissioning data and results.

Commercial Complex Chiller Plant: Diversity, Staging and Tenant Metering

Designing chiller plants for shopping malls and mixed-use complexes: load diversity, staging, primary/secondary hydraulics, tenant metering and thermal storage.

Air-Cooled versus Water-Cooled Chillers: A Full Comparison

Comparing air-cooled and water-cooled chillers on efficiency, footprint, water use, maintenance, noise and cost, with guidance for each building type.