Heat pumps · Chillers · Sludge drying systems
Knowledge

Technical articles

Technical articles, sizing methods and O&M notes by product line.

Air-Source Heat Pump Fault Codes and Troubleshooting

Common air-source heat pump fault codes explained with causes and checks, from high pressure and low pressure to flow, defrost and communication alarms.

Hotel Hot Water by Air-Source Heat Pump: System Design and Equipment Selection

Designing hotel hot water with air-source heat pumps: demand per room, peak-hour factor, unit and tank sizing, return loops and legionella control.

School Dormitory Hot Water: Air-Source Heat Pump System Design

Designing hot water for school dormitories with air-source heat pumps: per-student demand, concentrated peak, storage sizing, holiday mode and anti-tamper.

Hospital Hot Water Systems: Design Requirements for Air-Source Heat Pumps

Design requirements for hospital hot water: separate circuits, 60 °C storage and thermal disinfection, redundancy, water quality and infection control.

Factory Dormitory Hot Water: Air-Source Heat Pump Design for Shift Patterns

Designing hot water for factory dormitories: shift-based demand, three daily peaks, plant sizing, storage and retrofit of coal or gas boilers.

Heat Pump versus Electric Water Heater: Energy and Cost Comparison

Comparing air-source heat pumps with electric resistance water heaters: energy per cubic meter, running cost, capital cost and payback, with worked numbers.

Heat Pump versus Gas Boiler for Hot Water: Running Cost and Carbon

Comparing air-source heat pumps with gas boilers for hot water: energy per cubic meter, running cost at different tariffs, carbon and hybrid options.

Commissioning an Air-Source Heat Pump: Step-by-Step Checklist

A step-by-step commissioning sequence for air-source heat pump water heaters: pre-start checks, charging, measurement and acceptance values.

Air-Source Heat Pump Maintenance Schedule and Service Plan

A practical maintenance schedule for commercial air-source heat pumps: monthly, quarterly and annual tasks, coil cleaning, charge checks and record keeping.

220 V or 380 V: Choosing the Power Supply for a Heat Pump

Single-phase versus three-phase heat pumps: current draw by capacity, cable sizing, starting current, RCD selection and the cost of a supply upgrade.