Heat pumps · Chillers · Sludge drying systems
Industrial cooling · Process

Chiller Life and Warranty: Three Time Scales

“How long will this chiller last?” and “what is the warranty?” are two different questions. The first is a technical estimate under specified operation; the second is a contract that defines who pays for a failure and for how long. Mixing them produces two common mistakes: assuming the machine is finished when the warranty ends, or assuming the warranty covers every failure.

The useful framework has three time scales: technical life, warranty period and overhaul interval. Each has a different driver and a different decision.

1. Three time scales

Scale Typical value Driven by What the owner should do
Technical life Scroll 8–12 years; screw 12–18 years Running hours, water quality, load profile Keep an operating log; review at year 8
Warranty 12–24 months whole unit; major parts may differ Contract terms Keep commissioning, water and maintenance records
Overhaul interval 20,000–30,000 h for screw compressor Running hours, discharge temperature, oil analysis Plan by hours, not by failure
Heat-exchanger cleaning 1–3 years Water quality, approach temperature Clean on differential pressure or approach

The technical life is not a promise. A chiller running 8,000 hours a year in a three-shift factory accumulates compressor hours four times faster than an office running 1,500 hours. The same model can have a 15-year technical life in one site and an 8-year economic life in another.

2. The components age differently

Component Typical life Failure driver Evidence of decline
Scroll compressor 8–12 years Starts, discharge temperature, oil Current rise, capacity loss, noise
Screw compressor 12–18 years Oil condition, load, rotor wear Oil analysis, discharge temperature, clearance
Shell-and-tube exchanger 10–15 years Water chemistry, fouling, tube vibration Approach temperature, tube leak
Controller and drives 8–12 years Heat, voltage, obsolescence Alarms, unavailable boards
Pump and tower 8–15 years Water quality, balancing, corrosion Flow, head, vibration

The heat exchanger is often the component that decides the economic life. A chiller with a clean compressor but a leaking condenser may be repairable, but the repair can cost 20–30% of a new unit. The decision depends on the tube material, the number of failed tubes and the remaining life of the rest of the machine.

3. Efficiency degradation has a cash value

A chiller that loses 10% of its COP does not stop working; it quietly costs more. For a 350 kW unit running 8,000 hours a year, compare COP 5.5 with COP 5.0 at the same load. The input power at COP 5.5 is 63.6 kW; at COP 5.0 it is 70.0 kW, a difference of 6.4 kW. Over 8,000 hours, that is 51,200 kWh; at 0.7 CNY/kWh, about 35,800 CNY/year. Over five years, the degradation costs more than many repairs.

This is why the commissioning baseline matters. A chiller with no baseline cannot prove it has degraded; a chiller with a baseline can justify a cleaning, a refrigerant check or a replacement on evidence rather than on age.

4. What the warranty excludes

A typical warranty covers defects in material and workmanship for 12–24 months. It usually excludes:

Water quality. Scale, corrosion, chloride pitting and biological fouling are owner responsibilities. A condenser perforated by untreated water is not a manufacturing defect.

Freeze damage. A chilled-water loop without freeze protection that splits a tube is an operational failure.

Electrical supply. Voltage imbalance, single phasing, surges and lightning are site conditions. A board damaged by a surge is usually excluded.

Installation by others. Misaligned piping, missing strainers, incorrect cable sizing and inadequate foundations are installation defects.

Wear parts and consumables. Filters, belts, gaskets, oil and refrigerant are maintenance items, not warranty items.

Consequential loss. Lost production, spoiled product and rental chiller costs are rarely covered unless the contract says so.

5. Records that decide the claim

Keep the commissioning report, the water analysis, the daily log, the maintenance records and the alarm history. A warranty claim with a complete record is evaluated on the facts; a claim with no record is evaluated on suspicion. The same failure can be a defect or an exclusion depending on the evidence.

Record the water treatment chemistry, the condenser approach temperature, the oil analysis and the compressor current. These are the early warnings. A rising approach temperature at year two is a cleaning issue; a rising current with a stable load is a compressor or refrigerant issue.

6. Repair or replace

Use three tests. Cost: a single repair above 40% of replacement value, or cumulative repairs above 60% over three years, points to replacement. Performance: a COP more than 25% below the commissioning baseline after cleaning and repair means the machine is no longer economically recoverable. Compliance: a refrigerant phase-out or a new efficiency rule can make a working chiller non-compliant.

Do not replace on age alone. A 12-year-old screw chiller with a clean exchanger, good oil analysis and available spares may be the lower-cost option. Do not repair on sentiment alone either; a second condenser failure in three years is a signal that the water chemistry or tube material is wrong.

Common questions

Is a 15-year technical life a guarantee?

No. It is an estimate under specified water, load and maintenance conditions. Actual life depends on running hours, starts, water quality and service.

Does the warranty cover a leaking condenser?

Only if the leak is a material or manufacturing defect under correct water chemistry. Corrosion from chloride, scale or neglected treatment is normally excluded.

When should the first overhaul be planned?

For a screw compressor, around 20,000–30,000 running hours, with oil analysis before and after. Plan it by hours, not by a calendar year.

How often should the condenser be cleaned?

On condition: approach temperature or differential pressure. A well-treated open loop may need annual cleaning; a poor loop may need it every six months.

Can efficiency degradation be reversed?

Partially. Cleaning the exchanger, correcting the refrigerant charge and repairing a faulty expansion valve can recover much of the loss. Compressor wear and tube fouling that has damaged the surface cannot be fully reversed.

What is the strongest warranty record?

Commissioning data plus water analysis, maintenance dates and alarm history. It shows the machine was operated inside its envelope and that failures were addressed when they appeared.

What three time scales?

Design life, economic life and actual life. Each is set by different things: materials, tariffs and duty. A warranty covers defects, not wear.

What should the contract fix?

Response time, exclusions, spare supply and the start date. A long warranty without a response time is a promise, not cover.

Further technical reading

LONGCOM can separate technical life, warranty and overhaul interval for a specific chiller, and build the baseline that supports a repair-or-replace decision. For a lifecycle review, contact 400-878-0280 or 13002001280.

Related reading

Chiller Acceptance Standards · Chiller Factory Acceptance Test · Chiller Retrofit Payback